Hansen Female Threaded Elbow

Hansen Female Threaded Elbow SKU: HTE Features Manufactured in New Zealand using the best quality materials to withstand the harshest weather conditions. Precision Heavy Duty Tapered Threads give a Strong Reliable Seal Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water Manufactured from High Quality Glass Fibre Reinforced Nylon giving a Weather, Termite, Fungi & Bacteria Resistant Common Applications Include Horticultural, Agricultural, Irrigation, Marine & Plumbing Material strong enough to minimise potential cross threading WRAS – Approval for use with potable (drinkable) water as they will not leach contaminants into the water. Suitable for use above or below ground in varying operating pressures and temperatures Strong, Lightweight and Compact Available in a variety of thread combinations and connections. Technical Info Pressure & Flow Rate Fitting sizes 16mm to 63mm Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C. Fitting sizes 75mm to 100mm Maximum Working Pressure; 12.5 bar (1250 kPa, 182 psi) at 20 degrees C. Used For Medium Density Pipe Blueline SKU: 2500-(OD Pipe Size)PN12-5-(Coil Length) e.g 2500-25PN12-5-100 (25mm = OD size, PN12.5 = Bar, 100 = Coil Length) Redline SKU: 360-(OD Pipe Size)PN(Bar Rate)-(Coil Length) e.g 360-63PN9-100 (63mm = OD size, PN9 = Bar, 100 = Coil Length) Greenline SKU: 370-(OD Pipe Size)PN(Bar Rate)-(Coil Length) e.g 370-32PN8-100 (32mm = OD size, PN8 = Bar, 100 = Coil Length) Tips Medium-density pipe is referred to by its outside diameter (OD) Medium Density Fittings go overtop of MD Pipe The pipe needs to be pushed past the o-ring in the MD fitting to seal If the MD pipe is scratched or gouged, it may not create a seal on the o-ring and leak. Use tools to tighten Dimensions & Materials Installation & Assembly Handy Tips for installing Hansen Easy Fit Compression Fittings https://www.hansenproducts.com.au/video/md-compression-fitting-handy-tips FAQ Can I use MD Fittings in my house water supply? Yes, Hansen Easy Fit MD Compression Fittings are potable (drinking) water approved. Does this fitting carry Hansen Warranty? Yes, all Hansen manufactured products carry our Hansen Warranty. Can I use Hansen Easy Fit Fittings under driveways, paths and other solid foundations? No, Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or solid foundations. How tight should I tighten my Easy Fit MD Compression fittings? Up to 32mm, just tighten hand tight and all sizes above use a spanner to tighten another 1/2 to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-Ring, all the Nut is doing is compressing the Grip Ring onto the pipe to hold the pipe in place. https://www.youtube.com/watch?v=n2pJYtbQIPs AS/NZS 4020:2018 TESTING OF PRODUCTS FOR USE IN CONTACT WITH DRINKING WATER