WD-40 Classic Multi-use oil 100ml spray can with extension

Description WD-40® Classic 5-in-1 Multi-Use oil in handy 100ml spray can with extension tube WD-40 Multi-Use product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture, and lubricates almost anything. The WD-40 Multi-Use Product 100ml handy can is the perfect travel-sized problem solver. Temperature application range: -50 to 150 °C 5-in-1 product: Rust Remover Lubricant Contact spray Cleaner Corrosion protection Characteristics Compatible with plastics, rubbers and all metals Gets under dirt, marks, and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickers Protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements Lubricating ingredients are widely dispersed, and hold firmly to all moving parts Loosens rust-to-metal bonds and frees stuck, frozen, or rusted metal parts Because WD-40 displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits (Remember to turn the power off before you spray) Silicone and chlorinated solvent free Non-conductive Field of application Garden tools and implements Battery connections Bicycle frame Door locks and hinges Power tools Engines Alloys Exhaust systems Technical specifications Boiling point (initial): 183°C (360°F) Color: Light amber cloudy liquid Solubility in water: Insoluble Odor: Characteristic Freeze point/ pour point: <-63°C (-81°F ) (ASTM D-97) Vapor density: >1 VOC: 24.5% by weight Kinematic viscosity @ 38˚ C (100˚ F ) 2.8 cSt Appearance: Aerosol – Aerosolized Liquid Bulk – Liquid Flashpoint: 59°C (138°F) (TCC) Flammable limits: LEL: 0.6% UEL: 8.0% Vapor pressure: Aerosol – 95-115 psi @ 21° C (70° F) Bulk – 1 psi @ 38° C (100° F) (ASTM D323) Specific gravity @ 25˚ C (77˚ F ) 0.81 Operating temperature: -50°C to 150°C (-60° F to 300° F) Percent volatile: 70-75% by weight Dielectric strength: 38,000 volts per 0.10 inch Kb Value: 25 wet film thickness: 50 um (0.002 inch) Coverage: 600-1000 ft2 per gal You can find detailed information in our datasheet here Hazard Statements (CLP)   Signal word: Danger. Hazard Statements (H-codes) H336: May cause drowsiness or dizziness. H222: Extremely flammable aerosol. H229: Pressurized container: May burst if heated. Precautionary Statements (P-codes) Prevention: P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P261: Avoid breathing vapor or aerosol. P271: Use only outdoors or in well-ventilated areas. Response: P301 P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P312: Call a POISON CENTER/doctor if you feel unwell. P331: Do NOT induce vomiting. Storage: P405: Store locked up. P410 P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C. Disposal: P501: Dispose of contents/container in accordance with local regulations. Additional Labeling (EUH-codes) EUH066: Repeated exposure may cause skin dryness or cracking. Storage and Disposal Store in a cool, well-ventilated place. Dispose of in compliance with local regulations. ×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,   Information on product safety (Manufacturer, Contact) WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, 49 6172 677 450, [email protected], www.wd40.de Downloads wd-40-classic-multi-use-product-spray-datasheet.pdf wd-40-classic-multi-use-product-spray-datasheet.pdf